RANGE BETWEEN 2Kw TO 90Kw

  • Assured reliability
  • Reduced energy cost
  • Air system integration
  • Maintenance free drive system
  • The best air delivery capacity in the industry thanks to an innovated compressor element and efficient package design.
  • An agreeable and pleasant work environment with extremely low noise levels achieved via a unique low noise, high performing radial fan.
  • Exact tuning capabilities to the application and versatile control over your compressed air system with the state of the art Elektronikon® regulator.
  • All-in-one integration of sophisticated solutions for condensate treatment, energy recovery and protection in extreme conditions.
  • High performance beating any workshop solution.
  • Complete solution mounted on a tank/ floor and ready to supply high quality air immediately after delivery.
  • Controls tailored to the needs of any workshop: the Elektronikon® regulator is easy to comprehend and operate by anyone in the workshop using simple universal pictograms.


GX 2-11

  • TECHNOLOGY: Oil-injected rotary screw compressors
  • CAPACITY: 4.0 to 27.8 l/s 8.5 to 60 cfm
  • WORKING PRESSURE: 7.4 to 13 bar(e) 107 to 189 psig
  • MOTOR SIZE: 2.2 to 11 kW 3 to 15 hp
  • NOISE LEVEL: 61 to 68 dB(A)

GAe 11-30/GAe 18-30 VSD {Excellence Series}

  • TECHNOLOGY: Oil injected rotary screw compressors incl. VSD technology
  • CAPACITY: 20.4 to 80.0 l/s 43.2 to 169.4 cfm
  • WORKING PRESSURE: 4 to 13 bar(e) 58 to 185 psig
  • MOTOR SIZE: 11 to 30 kW 15 to 40 hp
  • NOISE LEVEL: 67 to 71 dB(A)

GA 30+ to 90

  • TECHNOLOGY: Oil-injected rotary screw compressors
  • CAPACITY: 71to 281L/S; 151 to 596 CFM
  • WORKING PRESSURE: 7.4 to 13 bar(e) 107 to 189 psig
  • MOTOR SIZE:30 to 90 kW; 40 to 125 hp
  • NOISE LEVEL: 65 to 75 dB(A)

GA 7-37 VSD +

  • TECHNOLOGY: Oil injected rotary screw compressors incl. VSD technology
  • CAPACITY: 7.2 to 116.4 l/s 15.2 to 246.4 cfm
  • WORKING PRESSURE: 4 to 13 bar(e) 58 to 185 psig
  • MOTOR SIZE: 7 to 37 kW 10 to 50 hp
  • NOISE LEVEL: 62 to 67 dB(A)




GA 37-75 VSD +

  • TECHNOLOGY: Oil injected rotary screw compressors incl. VSD technology
  • CAPACITY: 26 to 225 l/s 55 to 467 cfm
  • WORKING PRESSURE: 4 to 13 bar(e) 58 to 185 psig
  • MOTOR SIZE: 37 to 75 kW 50 to 100 hp
  • NOISE LEVEL: 67 to 70 dB(A)


GA 37-90 VSD

  • TECHNOLOGY: Oil injected rotary screw compressors incl. VSD technology
  • CAPACITY: 26 to 293 l/s 55 to 621 cfm
  • WORKING PRESSURE: 4 to 13 bar(e) 58 to 185 psig
  • MOTOR SIZE: 37 to 90 kW; 50 to 125 hp
  • NOISE LEVEL: 66 to 74 dB(A)


    Solid performance:

  • Steady pressure dew point
  • No chance of moisture entering the compressed air system.
  • Simple Reliability:

  • Quality components, generously sized
  • Simple and proven design
  • Effective control system (hot gas bypass).
  • Easy Installation:

  • Plug and play concept
  • Single electrical connection
  • All units pre-commissioned
  • Self regulating.
  • Minimal maintenance:

  • Long service intervals
  • Few component replacements
  • Ergonomic design for fast access to key components.

    FX 1-21 Refrigerant Dryers

  • TECHNOLOGY: Air-cooled refrigerant air dryers.
  • CAPACITY: 7 to 1236 l/s 14 to 256 cfm
  • WORKING PRESSURE: 13 to 16 bar(e) 189 to 232 psig
  • PRESSURE DEW POINT: +3 to +5 °C 37 to 41 °F

CDX 120-1050 DESICCANT DRYERS

Reliable, High-Quality Air:
  • Unique, worldwide experience in supplying for the most demanding applications.
  • Nothing but top end components.
  • Robust design (large desiccant overfill, optimum aspect ratio, low air speed).
  • Built to perform across a wide range of conditions.
  • Tight control and monitoring.
  • Based on years of extensive research and continuous development.
  • Designed using state-of-the-art tools and facilities
  • TECHNOLOGY: Heatless adsorption air dryers.
  • CAPACITY: 120 to 1050 l/s 252 to 2223 cfm
  • WORKING PRESSURE:4 to 16 bar(e) 58 to 232 psig
  • PRESSURE DEW POINT:-40 to -70 °C -40 to -100 °F

OIL AND DUST REMOVING FILTERS

After compressing the air, the concentration of particles and moisture increases. This creates an abrasive mixture that can cause extensive damage. Instruments and tools can malfunction, spray painting and breathing air can be rendered unusable, maintenance costs will increase and products will be spoiled. The range of Atlas Copco's DDx - PDx - DDxp and Qdx filters, when used in the correct combinations, will provide high quality air from 9 to 7200 l/s at nominal working conditions.

  • DDx range:Coalescing and particulate filters for general purpose protection, removing liquid water and oil aerosol to 0.1 mg/m (0.1 ppm) and particles down to 1 micron.
  • PDx range: High efficiency coalescing and particulate filters, removing liquid water, oil aerosol to 0.01 mg/m (0.01 ppm) and particles down to 0.01 micron.
  • QDx range:Q Active carbon filter for removal of oil vapours and hydrocarbon odours with a maximum remaining oil content of 0.003 mg/m (0.003 ppm) to be installed after a PD filter.
  • DDxp range:Particulate filters for dust protection, removing particles down to 1 micron.

In-line compressed air filters, DD, DDp, PD, PDp and QD

  • TECHNOLOGY: In-line high efficiency compressed air filtration
  • CAPACITY: 11 to 650 l/s 23 to 1378 cfm
  • WORKING PRESSURE: 7 to 16 bar(e) 102 to 232 psig
  • FILTRATION EFFICIENCY: ISO 8573.1

Air Receivers

After compressing the air, the concentration of particles and moisture increases. This creates an abrasive mixture that can cause extensive damage. Instruments and tools can malfunction, spray painting and breathing air can be rendered unusable, maintenance costs will increase and products will be spoiled. The range of Atlas Copco's DDx - PDx - DDxp and Qdx filters, when used in the correct combinations, will provide high quality air from 9 to 7200 l/s at nominal working conditions.
  • DDx range:Coalescing and particulate filters for general purpose protection, removing liquid water and oil aerosol to 0.1 mg/m (0.1 ppm) and particles down to 1 micron.
  • PDx range: High efficiency coalescing and particulate filters, removing liquid water, oil aerosol to 0.01 mg/m (0.01 ppm) and particles down to 0.01 micron.
  • QDx range:Q Active carbon filter for removal of oil vapours and hydrocarbon odours with a maximum remaining oil content of 0.003 mg/m (0.003 ppm) to be installed after a PD filter.
  • DDxp range:Particulate filters for dust protection, removing particles down to 1 micron.

Air Net - quality air connection

Atlas Copco's innovative AIRnet™ compressed air piping system complements your compressed air projects by delivering quality air exactly where you need it, at the right pressure and at the lowest possible cost, It consists of high quality elements only and distinguishes itself through flexibility and ease of installation, meeting all of your design and production requirements. Thanks to its wide range of durable products, AIRnet is a complete solution from source to production.
  • The flexible fit
  • Easy and quick to fit
  • Even faster to put into place
  • Pipe Clips
  • Hanging Brackets
  • Different Bracketing Solutions Better air quality
  • No internal pollution - corrosion free over time
  • System remains clean, protecting down stream equipments
  • Leakages levels down to zero
  • Painted in the standard color for compressed air applications
  • Low P levels, optimizing the usage of compressed air
  • 100% modular and no material deterioration enables reuse-ability
  • Extremely light and easy to install - efficient manpower solutions + minimun downtime
  • Complete line of pipes, fittings and accessories to cover client's demand
  • Professional quotations with the AIRnet Planner and Quoter
  • Stock availability
  • 10 year warranty and unique design provides superior competitive advantage

Reduced energy costs:

  • AIRnet's smooth inner aluminium surface provides more air flow with less pressure drop
  • AIRnet's corrosion-free pipes and fittings minimize the risk of leakage and maintain the pressure drop constant over time, reducing energy waste.
  • An integrated o-ring ensures an airtight fit.
  • A pressure drop reduction of 1 bar results in 7% energy savings of your total compressor installed power

Time saving:

  • AIRnet can be installed easily and quickly by just one person, without requiring any training
  • An AIRnet system can be built in one-third the time of a conventional one, no specialized tools needed. Network maintenance is equally fast.
  • As all components are easily adjustable and reusable, AIRnet evolves right along with your production setting.
  • AIRnet is compatible with any existing pipe work and equipment.
  • To minimize downtime, your installation can be pressurized immediately upon completion.

The AIRnet piping system is resistant to corrosion, mechanical shocks, thermal variations and outdoor weather conditions. Thanks to consistent clean quality air, the AIRnet range ensures longer longevity of your equipment and

Build to last:

  • TECHNOLOGY: Compressed air piping system
  • PRESSURE: Maximum working pressure 13 bar(e)
  • WORKING TEMPERATURE: -20 °C to +70 °C -4 °F to 158 °F

  • AIRSCAN™ is a flexible diagnostic package for compressed air systems that allows you to select any depth of air audit required for your particular system.
  • Options range from full system audits to specific measurements, such as leak detection, power, flow rate, etc.
  • Complete Compressed Air Audit System:

  • A full system audit performed over a 7-day period measuring flow rate, power, pressure, air quality, temperature and leakage. Using the collected information, AirScan compiles a detailed report, including cost analysis, graphic representations, and recommendations for improving system performance.

Flow Check:

  • We accurately measure and record compressed air flow rates for any compressor make or type. Our flow meter can even be installed without interrupting your processes.

Leak Check:

  • Compressed air leakage is like blowing away your financial resources. Leakages of 10% - 25% are not unusual in most systems. Leakcheck identifies tags and quantifies the leaks throughout your compressed air system.

Power Check:

  • A non-intrusive method of measuring actual power consumption for all types of compressors. This gives an accurate overview of your annual expenditures on compressed air production.

Bearing Check:

  • Using SPM (shock pulse monitoring) to analyze bearing conditions can prevent unforeseen failures that often result in costly production losses and high rental costs.

Air Quality Check:

  • Contaminated air (oil/gas/water/particles) not only means frequent and costly filter cartridge changes, but also threatens production quality and can inevitably lead to production

Atlas Copco Genuine Spare Parts:

Atlas Copco genuine parts are available 7 days a week as they are ex-stock with the service back of 10 qualified service engineers Why Use Genuine Atlas Copco Parts? Genuine Atlas Copco parts are manufactured to meet the same exacting standards as your compressor. They have passed the same endurance tests and have been proven to provide the best protection of your investment. Genuine function-specific parts offer the best value. Guaranteed!

Features:

  • Manufactured according specifications created by Atlas Copco, the leading manufacturer of compressors
  • Every part undergoes complete endurance testing for operation under the toughest conditions
  • Meets the strictest requirements for safety and quality

Benefits:

  • Reduced operational costs
  • Fewer production interruptions
  • Excellent protection of your compressor, guaranteeing long service life
  • Increased resale value

Filters and Separators

Compressor Air Filtration

Compressor rotors operate with minimal clearances, guaranteeing high performance. However, dirt particles can cause damage, reducing performance and potentially increasing operating costs. To safeguard the high-tech screw element at the heart of your investment, Atlas Copco focused on the intake air filtration system. Atlas Copco uses special filtration elements to prevent contaminants from passing into the compressor. Yet, we designed them to allow the volume of air to freely flow into the machine. Parts from other manufacturers can never match the performance of these genuine Atlas.

Compressor Oil Filtration

Dust and dirt contaminating the compressor oil can lead to damage to or performance losses for rotors and their housings. Since the same oil lubricates the compressor element bearings, damage to these vital components could potentially lead to rotor contact and service.failure. Genuine Atlas Copco compressor oil filters have high performance and are composed of specific filter elements. Features include high-grade filtration efficiency, temperature resistance, and resistance to synthetic oils. Built to withstand high operating pressures, Atlas Copco filters have superior service life, thanks to their high dirt holding capacity.

Compressor Oil Separation

Only genuine Atlas Copco replacement oil separator elements can offer extremely low oil carryover combined with low pressure differentials. This means better quality air and minimal operating costs through lower oil consumption and longer service life of fine filters installed downstream.

Exchange airends:

State-of-the-Art

Each compressor incorporates a precision-made screw air end engineered and manufactured by Atlas Copco. Atlas Copco designs its screw air ends for maximum efficiency, low-noise operation, and long service life. Thanks in large to our advanced screw air end design, our compressors feature very low energy consumption.

Protect Your Investment:

With Service Exchange, you can avoid unexpected air end failures and the risk of consequential damage to other vital compressor components. An Atlas Copco Service Exchange air end offers the most cost-effective solution for extending the service life of your compressor.

Service kits:

The Parts You Need, When You Need Them

Using Service Kits allows you to plan compressor maintenance in advance, avoiding surprises that can affect your budget. Considering the time and cost savings from not having to order and install separate spare parts, Service Kits are without doubt the best cost-effective maintenance solution. Not to mention the risks involved when installing spare parts that may resemble the originals, but are not guaranteed to do the same job.

Features:

  • Saves time by obtaining all the correct and genuine parts
  • Easy to acquire and attractively priced
  • Includes all consumables required for maintenance

Benefits:

  • Minimizes downtime
  • Keeps your maintenance budget low
  • Saves time finding correct parts

Service Provided by Vedant:

Our godown is open 7 days a week including Sundays & Thursdays. We are having sufficient stock of spares at our godown. We also have well trained service team which is certified by Atlas Copco. We also undertake AMC & health checkups for Atlas Copco Air Compressors. We also install & commission all types of Atlas Copco Air Compressors.

Energy Saver ES The value of compressed air:

As energy can represent over 70% of a compressor's lifecycle costs (LCC), optimizing energy consumption is essential. In fact, considering that the generation of compressed air can account for more than 40% of a plant's total electricity bill, it is even crucial. With ES, Atlas Copco's entirely new range of central control solutions, we provide you with a partner on the road to unrivalled cost savings.

Get the most out of your compressed air:

Two key elements influencing your system running costs are operating pressure and air leakage. Reducing either can save you considerable amounts of money. Because of the wide pressure band, multiple machine installations operating in a cascade are particularly inefficient. Leaks, on the other hand, have been estimated to waste as much as 30% of a compressor system's output and energy usage. Most compressed air systems older than five years have a leakage rate of around 20% of the total volume consumed. Even when your industrial facility is not operational, leakage continues and each 3 mm (0.12") leak is estimated to represent nearly 42,000 kWh of wasted energy per year.

Reciprocating Compressor (Automan 5 - 15 HP):

  • A solid, robust and reliable compressor for trouble-free operation.
  • With the Automan range, Atlas Copco has developed a reliable solution for professionals and semi professionals that need a quality air compressor for their daily, non-continuous operations. A wide choice in compressor dimensions, receiver sizes, portability and working pressures is provided to suit every application.
  • AB Series is specifically designed for non-continuous operations having industry leading performance and twin outlet pressure regulator and wheels on receiver mounted as standard feature. Single phase option is available for 2-3 hp machine
  • SLOW RUNNING BIG SIZED BLOCKSENSURE DURABILITY AND LONGER LIFETIME
  • DEEP FINED AFTER COOLER REDUCES COMPRESSED AIR OUTLET TEMPRETAURE
  • WHEELS FOR MOBILITY AND EASE OF OPERATION
  • CAST IRON COOLING BLOCKS WITH HIGH COOLING FANS
  • COMPLETELY ENCLOSED BELT GUARD PROVIDES FOR SAFE OPERATIONBY PROTECTING ALL MOVING PATS.

Conatct Us